- Wi-Fi Network
- Your Access Point is broadcasting 2.4 GHz Wi-Fi.
- Your Access Point uses the same SSID (Wi-Fi name) for both 2.4 GHz and 5 GHz:
- Connect Your Mobile Device
- Ensure your phone or tablet is connected to the Wi-Fi network.
- Turn off VPNs, Ad blockers, or private DNS settings during setup.
- Enable Phone Permissions
- Turn on Bluetooth on your device.
- Enable Location Services.
- If the app asks for permissions like Bluetooth or location, grant them.
- Prepare the Smart Bulb
- If there is a hub that is needed, ensure it is connected via ethernet to the Access Point or data wall jacks in your unit.
- Make sure the bulb is within range of your Wi-Fi network.
- Install the bulb in a standard light fixture and turn it on.
- Wait for it to start blinking, indicating it’s in pairing mode.
- If it doesn’t blink, turn the bulb off and on several times to reset it.
- Install the Compatible App
- Download and install the recommended smart home app.
- Open the app and follow the instructions to add a new device.
- Select the correct device type (e.g., "Lighting" → "Wi-Fi Bulb").
- Complete the Setup
- Let the app find and pair with the bulb.
- Once paired, you can rename the bulb and assign it to a room.
Smart Bulb Setup Instructions to Wi-Fi Network
